Haocool
A‑18°C cold storage for 1500 tons of frozen goods is widely used for meat, seafood and other frozen commodity logistics projects. When the internal height is 4 m, the required floor area reaches approximately 1800 m².
Modular (pre‑fabricated) cold rooms mean insulation panels, evaporators and refrigeration units are pre‑manufactured in the factory and assembled on‑site. This construction solution is popular for overseas cold‑storage projects for its fast installation cycle and reliable performance.
Core Factors That Determine 1500 Ton‑18°C Modular Freezer Cost
- Cold storage dimension & volume
Confirm target storage tonnage, floor area and internal cubic capacity. Tonnage calculation depends on stacking density of actual goods. - Type of stored goods
Different products such as frozen meat, seafood or special raw materials influence refrigeration load, safety backup configuration and hygiene requirements. - Storage method: block stacking vs racking system
Whether you use pallet racking or direct block stacking defines practical warehouse height, usable capacity and overall project investment. - Site location & local site conditions
Site conditions affect civil‑work expense, labor cost, construction schedule and transportation of equipment. Land cost is generally excluded from cold‑room equipment quotation. - Insulation panel specification
For‑18 °C deep‑freezer rooms, 150 mm or 200 mm thickness polyurethane insulation panels are common options. Thicker panels deliver better thermal performance and lower long‑term power consumption. - Customized engineering solution
Professional pre‑project layout design helps balance initial construction expense and long‑run electricity & maintenance operating costs. - Warehouse building structure type
Two mainstream building options: reinforced‑concrete structure or steel‑frame structure.- Reinforced‑concrete: long service life, but longer construction period, more column obstacles which reduce effective storage space.
- Steel‑frame: fast erection, fewer internal columns, higher space utilization, widely adopted for large‑scale logistics cold‑storage projects.
Two Quotation Options for Overseas Clients
The below data is for preliminary budget reference only, not formal offer.
- Equipment‑only supply: Modular cold‑room panels + full refrigeration system, including factory delivery, sea freight, installation guidance and commissioning.
- Full turnkey EPC solution: Complete project including building structure, insulation enclosure, refrigeration units, auxiliary systems, on‑site installation, commissioning and technical training.
To get an accurate quotation for your 1500 ton‑18 °C freezer project, please provide information including target goods type, stacking / racking plan, site layout drawing and site photos.
FAQ
Q1: What internal height is recommended for a 1500 ton‑18°C modular cold storage?
A: 4 m is a common reference height. If you adopt high‑level pallet racking, you can increase warehouse height to reduce required floor area, yet you need to upgrade forklift equipment and adjust refrigeration load accordingly.
Q2: What panel thickness should I choose for‑18°C frozen cold storage?
A: 150 mm PU panel is the basic choice for‑18°C freezer. For high‑temperature‑difference tropical‑zone regions or long‑hour continuous operation scenarios, 200 mm panels can cut energy consumption effectively.
Q3: What is the difference between equipment‑only supply and full turnkey EPC for large cold‑storage projects?
A: Equipment‑only supply delivers cold‑room hardware and supports overseas commissioning guidance, suitable for customers who handle local civil construction. Full turnkey EPC covers civil‑work, installation, testing and operator training and delivers a fully‑operational cold‑storage facility.